home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 1 / Cream of the Crop 1.iso / BUSINESS / EXHOST17.ARJ / MANUAL.DOC < prev    next >
Text File  |  1991-09-04  |  84KB  |  1,950 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.       ▒▒▒▒▒▒▄ ▒▒▄ ▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▄ ▒▒▄ ▒▒▒▒▒▒▄ ▒▒▄ ▒▒▄ ▒▒▄ ▒▒▒▒▒▒▄
  13.       ▒▒█▀▀▀▀  ▒▒▒▒█  ▒▒█▀▀▀▀ ▒▒█▀▀▀▀ ▒▒█ ▒▒█  ▀▒▒█▀▀ ▒▒█ ▒▒█ ▒▒█ ▒▒█▀▀▀▀
  14.       ▒▒▒▒▒▄    ▒▒█   ▒▒▒▒▒▄  ▒▒█     ▒▒█ ▒▒█   ▒▒█   ▒▒█ ▒▒█ ▒▒█ ▒▒▒▒▒▄
  15.       ▒▒█▀▀▀   ▒▒▒▒▄  ▒▒█▀▀▀  ▒▒█     ▒▒█ ▒▒█   ▒▒█   ▒▒█  ▒▒▒▒█▀ ▒▒█▀▀▀
  16.       ▒▒▒▒▒▒▄ ▒▒█▀▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒█   ▒▒█   ▒▒█   ▒▒█▀  ▒▒▒▒▒▒▄
  17.        ▀▀▀▀▀▀  ▀▀  ▀▀  ▀▀▀▀▀▀  ▀▀▀▀▀▀  ▀▀▀▀▀▀    ▀▀    ▀▀    ▀▀    ▀▀▀▀▀▀
  18.                        ▒▒▄ ▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄
  19.                        ▒▒█ ▒▒█ ▒▒█▀▒▒█ ▒▒█▀▀▀▀  ▀▒▒█▀▀
  20.                        ▒▒▒▒▒▒█ ▒▒█ ▒▒█ ▒▒▒▒▒▒▄   ▒▒█
  21.                        ▒▒█▀▒▒█ ▒▒█ ▒▒█  ▀▀▀▒▒█   ▒▒█
  22.                        ▒▒█ ▒▒█ ▒▒▒▒▒▒█ ▒▒▒▒▒▒█   ▒▒█
  23.                         ▀▀  ▀▀  ▀▀▀▀▀▀  ▀▀▀▀▀▀    ▀▀
  24.           
  25.  
  26.                Executive Host - Premium Host/BBS for Telix
  27.                     Version 1.7, released 31 August, 1991
  28.                   Copyright (c) 1990, 1991 by John Wright
  29.                             All Rights Reserved
  30.  
  31.  
  32.  
  33.  
  34.  
  35.  
  36.                          Another fine product from,
  37.  
  38.        ╓──         ╓─┐         ╓─╖
  39.        ║─          ╙─╖         ╟─╜              Fine Software Products
  40.        ╙── xecutive└─╜ oftware ╨ roducts        for Intelligent People
  41.  
  42.              John Wright - Owner, Programmer, Technical Support
  43.                   
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.  
  61.  
  62.  
  63.  
  64.  
  65.  
  66.  
  67.  
  68.  
  69.                       T A B L E   O F   C O N T E N T S
  70. ---------------------------------------------------------------------------
  71.  
  72.  
  73.  
  74.     Introduction  ......................................................... 1
  75.         How to Register  .................................................. 2
  76.         System Requirements  .............................................. 3
  77.    
  78.     Installation  ......................................................... 3
  79.      
  80.     Main Menu Options  .................................................... 6
  81.         SysOp Menu  ....................................................... 6
  82.         Guest Menu  ....................................................... 10
  83.       Message Menu  ....................................................... 10
  84.  
  85.     SysOp's Function Keys  ................................................ 11
  86.  
  87.     Security Levels  ...................................................... 11
  88.  
  89.     The Host User File  ................................................... 12
  90.  
  91.     The Message Base  ..................................................... 12
  92.         Private Messages  ................................................. 13
  93.         Public Messages   ................................................. 13
  94.         The Message Data File  ............................................ 13
  95.  
  96.     Adding Files to the Host  ............................................. 13
  97.  
  98.     Installing Filelists (with descriptions)  ............................. 14
  99.  
  100.     Installing Bulletins  ................................................. 15
  101.  
  102.     Installing Doors  ..................................................... 15
  103.  
  104.     Installing Conferences  ............................................... 16
  105.  
  106.     Additional Security - Trashcan File  .................................. 18
  107.  
  108.     New User Questionnaire  ............................................... 18
  109.  
  110.     Event  ................................................................ 18
  111.  
  112.     Using the Host Utilities  ............................................. 19
  113.  
  114.     Using the Host Filer  ................................................. 20
  115.  
  116.     File Transfers  ....................................................... 22
  117.         Downloading  ...................................................... 22
  118.         Uploading  ........................................................ 22
  119.  
  120.     Important Files to Become Familiar With  .............................. 22
  121.  
  122.     Limitations  .......................................................... 24
  123.  
  124.     Support  .............................................................. 24
  125.  
  126.     APPENDIX A - High Speed and Error-Correcting Modem Setup  ............. A1
  127.  
  128.     APPENDIX B - Mail Doors, Offline Readers, Mail Networks, and Frontends. B1
  129.  
  130.  
  131.  
  132.  
  133.  
  134.                                                                      page 1
  135. ---------------------------------------------------------------------------
  136.  
  137.  
  138.  
  139.  
  140.     WHAT IS EXECUTIVE HOST?
  141.  
  142.     If you need a fully functional BBS or just a remote access program for
  143.     your computer, this is the program for you.  Executive Host is designed
  144.     to be entirely flexible and can be set-up in a matter of minutes.  A
  145.     fast and easy to use program that comes with everything you need to be
  146.     up and running immediately, and yet has the power to allow extensive
  147.     customization and handle E-mail, multiple message bases, bulletins,
  148.     file areas, and doors.  In addition, Executive Host now completely swaps
  149.     out of Telix when executing doors and the remote shell.  The sysop can
  150.     access his computer from remote with nearly the same amount of base memory
  151.     available as when using the computer normally.
  152.  
  153.          CONFERENCES!  PRIVATE FILE AREAS!  PRIVATE MESSAGE AREAS!
  154.  
  155.     Multiple conferences or forums may now be installed.  Up to 999
  156.     conferences, each with its own message base, file areas, doors,
  157.     and bulletins may be installed by the SysOp.  This powerful new feature
  158.     will allow you to assign security levels for each conference, enabling
  159.     private and semi-private conferences, file areas and message bases.
  160.     This ability also allows Executive Host to be linked into most of
  161.     the mail relay systems.  Utilities already exist for linking your
  162.     BBS with the PCrelay (RIMES) international mail network.  Support for
  163.     off-line mail doors and mail readers is also in place, and the host
  164.     may be executed from a frontend utility such as FrontDoor.
  165.  
  166.  
  167.     Executive Host is written entirely in the SALT language and requires
  168.     the communications program Telix, version 3.12 or above, to run
  169.     properly.  If you are not currently using Telix as your communications
  170.     package of choice, Executive Host is one of two reasons why you should
  171.     switch now.  The other reason being that Telix is beyond a doubt, the
  172.     finest, most powerful, and easy to use communications package available
  173.     today.
  174.  
  175.     What is a host and how does it differ from a BBS?  There is only one
  176.     major difference between a host and a self-standing BBS program, and
  177.     that is that a host is programmed in a special script programming language
  178.     that allows it to directly interface a communications program and use
  179.     all of it's powerful features (in this case Telix).  This allows the
  180.     Host Sysop to take advantage of all of the special functions and
  181.     features built into Telix.  For example, the registration and set-up of
  182.     protocols is not necessary since these come with Telix.  Also, in effect
  183.     you are getting two programs for the drive-space of one.  In other words,
  184.     since Executive Host is using the internal communication routines in
  185.     Telix, it is a very small program in itself.  An alternative remote access
  186.     program would be much larger and also much more expensive.
  187.  
  188.     A host will allow it's operator to access his computer from remote, while
  189.     away on business or pleasure.  Executive Host also has many other features
  190.     that allow the access of several hundred callers (up to 10,000), each of
  191.     whom may be assigned a security level for varied levels of access.
  192.     It's advanced message base and file transfer routines make it a prime
  193.     choice for someone interested in running a Bulletin Board System, either
  194.     for personal or business needs.  All of this for a low cost of only $35,
  195.     as compared to from $200-$500 for programs with comparable features.
  196.  
  197.  
  198.  
  199.  
  200.                                                                      page 2
  201. ---------------------------------------------------------------------------
  202.  
  203.  
  204.  
  205.  
  206.     Executive Host is now, without a doubt, the most powerful and full-
  207.     featured Host program available anywhere.  If you demand quality and
  208.     innovation from your software products, then Executive Host is the
  209.     right program for you.
  210.  
  211.  
  212.                      EXECUTIVE HOST IS SHARE-WARE.
  213.  
  214.     The extended use of this program after a 10 day trial period
  215.     requires it's registration with the author.  Some limits have been
  216.     built in to the unregistered version of Executive Host to encourage
  217.     individual compliance.  The file ORDER.FRM is a registration form
  218.     that you may print and mail with your check or money order for $35.00
  219.     plus $5 shipping (U.S. dollars).  If you live outside of USA/Canada,
  220.     please register on-line with your Visa/Mastercard/Discover card, or send
  221.     $40.00 in U.S. cash via registered or insured post.  Checks and
  222.     money orders written on foreign banks can no longer be accepted due
  223.     to extremely high bank processing fees.
  224.     Send your order to the author at the address below.
  225.  
  226.                              John Wright
  227.                          700 S Virginia Ave
  228.                          Marion, IL  62959  USA
  229.  
  230.     USE YOUR CREDIT CARD! - You may now register instantly online at our
  231.     support BBS with your VISA/MASTERCARD/DISCOVER card.  To order, call:
  232.  
  233.     ESP BBS - (618) 993-5091 (38400,N,8,1) - HST/V32.bis compatible.
  234.  
  235.     By registering online, callers can download their registered version
  236.     of Executive Host immediately, and not have to wait for the disk in
  237.     the mail.
  238.  
  239.                    What do you get when you register?
  240.  
  241.     1.  Full-featured, personalized Host with Zmodem capabilities.
  242.     2.  External protocol support including Puma, Bimodem, Jmodem, etc.
  243.     3.  Free upgrades for one full year or at least one major upgrade.
  244.         (obtained on our support bbs in the registered sysop conference)
  245.     4.  The right to download and use Beta versions of new upgrades still
  246.         undergoing testing. (also available on our support bbs)
  247.     5.  On-Line support at our BBS, 24 hours a day.
  248.     6.  Ability to design and use custom menus with Executive Host.
  249.     7.  Ability to run batch files when callers logon and logoff,
  250.         enabling utilities such as "Last Caller On" to be used.
  251.     8.  Quarterly Exechost Announcements mailed to all members.
  252.     9.  The finest, most powerful Host/BBS system available.
  253.  
  254.  
  255.     Some portions of Executive Host are Copyright and used with permission
  256.     of:
  257.     Colin Sampaleanu & Exis Inc.
  258.     and Jon Fleming
  259.     Thanks go to Jon for his permission to use portions of his password
  260.     code.
  261.  
  262.  
  263.  
  264.  
  265.  
  266.                                                                      page 3
  267. ---------------------------------------------------------------------------
  268.  
  269.  
  270.  
  271.  
  272.     Executive Host was written entirely in SALT, Telix's powerful script
  273.     language.  Special thanks go to Colin Sampaleanu, author of Telix
  274.     and the SALT language.  Telix is a registered copyright of:
  275.                                           Colin Sampaleanu
  276.                                           & Exis Inc.
  277.                                           P.O. Box 130
  278.                                           West Hill, ON
  279.                                           Canada  M1E 4R4
  280.     Register your copy of Telix today!
  281.  
  282.     All Executive Host utilities were written and compiled using the
  283.     Borland C++ Professional Compiler, and compressed using the PKLITE
  284.     Professional Executable File Compressor.  Borland C++ is a Copyright of
  285.     Borland International.  PkLite Professional is Copyright PkWare, Inc.
  286.  
  287.  
  288. SYSTEM
  289. REQUIREMENTS - 1. 256k of memory and an MS-DOS or compatible operating
  290.                   system.
  291.                2. Telix version 3.12 or above already installed.
  292.                3. A good text editor that accepts file names on the command
  293.                   line is required.  Ted.com, a public domain text editor
  294.                   from PC Magazine is included for those who do not
  295.                   currently have their own editor.  Obtaining a more
  296.                   cabable text editor, such as Qedit (shareware) is
  297.                   highly recommended.
  298.  
  299.  
  300.     INSTALLATION:
  301.  
  302.     To install Executive Host, copy ALL files into your Telix directory.
  303.     DO NOT copy any Executive Host files into a Telix script directory.
  304.     If you do not have your text editor configured in Telix, do so now.
  305.     This is done by running Telix and entering "ALT-O".  Then choose
  306.     "Filenames and Paths" and enter your editor's name under option "h".
  307.     (If you do not have your own text editor, ted.com will be used
  308.     automatically, and the Telix editor setup is not necessary.)
  309.  
  310.     Hit Escape to exit this screen.  If you do not have Telix configured
  311.     to use a status bar on the BOTTOM of the screen, do so now.  This is
  312.     done from the "Terminal Options" setup screen.  Save your new setup
  313.     and exit Telix.
  314.  
  315.     If you are using ZIP files, ensure that a copy of pkzip and
  316.     pkunzip are located in the host directory or somewhere in your system's
  317.     path.
  318.     Decide where you want your DOWN and UP directories and create
  319.     them with the "MD" command.  The DOWN directory is the primary
  320.     download directory where callers may download files from.  However,
  321.     downloading from the UP (uploads) directory is also permitted.
  322.  
  323.     One set-up would be:
  324.                                    C:\ -- Telix ---down
  325.                                               └----up
  326.  
  327.     You would create them by typing "MD C:\TELIX\DOWN" and "MD C:\TELIX\UP".
  328.  
  329.  
  330.  
  331.  
  332.                                                                      page 4
  333. ---------------------------------------------------------------------------
  334.  
  335.  
  336.  
  337.  
  338.         *** SPECIAL NOTE -  NEW FEATURE!!!
  339.  
  340.     Downloading is now permitted from any valid path on your system.
  341.     Paths are listed in an ascii (text) file named DOWNLOAD.LST.
  342.     See page 13 for further details.
  343.  
  344.     Now run the BOARD.BAT file by typing "BOARD" and pressing the Enter
  345.     key.  The set-up program will start automatically.  When prompted for
  346.     the SysOp's name and password, enter your name and password, or the
  347.     name and password of the person who will be the System Operator.
  348.     Next a list of system parameters will be displayed:
  349.     
  350.     Executive Host Configuration
  351.  
  352.     A: Name of BBS or Host System           : (left blank)
  353.     A: Executive Host Download Directory    : C:\Telix\down\
  354.     B: Executive Host Uploads Directory     : C:\Telix\up\
  355.     C: Connection Type                      : Modem
  356.     D: Minutes Allowed per Call             : 60
  357.     E: Hour of day to run event (0-23)      : 0
  358.     F: Host Access (Public or Private)      : Private
  359.     G: SysOp's Page Turned On/Off           : on
  360.     H: New Caller's security Level          : 1
  361.     I: Type of Monitor (Color/Mono)         : Mono
  362.     J: Baud Rate Locked (High-Speed Modems) : No
  363.     K: Auto Answer Mode or Ring Detection   : Auto
  364.     L: Number of Rings to Answer On         : 1
  365.     M: Protect Doors With Password          : Yes
  366.     N: FrontEnd Mail System is Attached     : No
  367.     Q: Quit without saving any changes
  368.     X: Exit and save changes to disk.
  369.  
  370.     Which option ->
  371.  
  372.     Each option should be configured to your individual needs as below,
  373.  
  374.     OPTION A: is the full path of where your download files directory will
  375.               be located.
  376.  
  377.     OPTION B: is the full path of where your uploads directory will be
  378.               located.
  379.  
  380.     OPTION C: should be left as "Modem" unless you are connecting two
  381.               computers directly with a serial cable, in which it should be
  382.               set at "Direct".
  383.  
  384.     OPTION D: Is the total minutes allowed on-line per call.  A number
  385.               between 1 and 60 minutes may be chosen or "0" for no limit.
  386.  
  387.     OPTION E: Time that the Host will execute it's event (EVENT.BAT).
  388.               Event may be run on any hour of the day (0-23), with "0"
  389.               representing midnight.
  390.  
  391.  
  392.  
  393.  
  394.  
  395.  
  396.  
  397.  
  398.                                                                      page 5
  399. ---------------------------------------------------------------------------
  400.  
  401.  
  402.  
  403.  
  404.     OPTION F: This setting, if set at "private", will not allow caller's who
  405.               are not registered to access the host.  If set at "public",
  406.               new callers may access the host at the security level set in
  407.               option H.
  408.  
  409.     OPTION G: This option sets whether the SysOp's page will be turned on
  410.               or off.
  411.  
  412.     OPTION H: This option selects the security level that will be assigned
  413.               to new, unverified callers prior to their verification and
  414.               upgrade by the SysOp.  Valid levels for this option are:
  415.     Level 0 - Caller is "locked-out" of the Host and will have no access.
  416.     Level 1 - Callers may read mail, view bulletins and info screen, page
  417.               the SysOp, or leave a private message to the SysOp.
  418.     Level 2 - Same as 1, but may also view filelists and perform a text
  419.               search on filelists.
  420.     Level 3 - Same as 2, but may also enter public messages and upload files.
  421.     Level 4 - Same as 3, but has access to doors and may view files.
  422.     Level 5 - Caller has full guest privileges including the ability to
  423.               download files.
  424.  
  425.     OPTION I: Is the type of monitor and should be set as "Mono" if you
  426.               have a monochrome monitor or "Color" if you have a color
  427.               monitor.
  428.  
  429.     OPTION J: This option should be left as "No" unless you are using an
  430.               error correcting modem, which requires the baud rate to
  431.               be locked.  (i.e. HST or Hayes 9600 baud modems)
  432.  
  433.     OPTION K: Auto Answer Mode sets the modem in the answer mode using
  434.               the Hayes ATS0=x command.  This method is satisfactory in
  435.               most cases.  Ring Detection mode waits until a ring is
  436.               detected before sending at ATA to the modem signalling it
  437.               to answer.  This mode may be preferred by some in order
  438.               to better interface with other software programs or hardware
  439.               (such as modem/fax cards).
  440.  
  441.     OPTION L: This option sets the number of rings the modem will wait
  442.               before answering the phone.  Values between 1 and 99 may
  443.               be selected.
  444.  
  445.     OPTION M: This option allows the sysop to decide whether password
  446.               protection is desired each time a caller returns from a
  447.               door.  It is recommended that this option be kept at
  448.               'Yes' for optimal security.  Password protection coming
  449.               out of the remote shell is mandatory.
  450.  
  451.     OPTION N: This option tells the host system if it is being executed
  452.               from a FrontEnd mail system, such as the FrontDoor mail
  453.               program.  FrontEnd programs are necessary in order to
  454.               interface with certain mail networks, such as FidoNet.
  455.  
  456.  
  457.  
  458.  
  459.  
  460.  
  461.  
  462.  
  463.  
  464.                                                                      page 6
  465. ---------------------------------------------------------------------------
  466.  
  467.  
  468.  
  469.  
  470.     This completes the initial installation of the host, and this is all
  471.     that is required to run the host as a remote access program, or as a
  472.     simple BBS.  Help on the Host's menus are available while running the
  473.     Host by typing "H" from the main, protocol and message menus.  More
  474.     detailed instructions on how to set up multiple doors, bulletins,
  475.     filelists, etc. come later in this manual.
  476.     
  477.  
  478.     THE MENU OPTIONS:
  479.  
  480.     DESCRIPTIONS OF THE SYSOP'S MENU COMMANDS.
  481.  
  482.                  █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  483.                  █  Executive Host  █░░     █▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  484.                  █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░     █  SysOp Menu  █░░
  485.                     ░░░░░░░░░░░░░░░░░░░     █▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░
  486.                                                ░░░░░░░░░░░░░░░
  487.       █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  488.       █      (D)ownload File           █░░
  489.       █      (U)pload File         █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  490.       █      (F)ile Directories    █       (M)essage Menu          █░░
  491.       █      (V)iew File           █       (B)ulletins             █░░
  492.       █      (T)ext Search         █       (O)pen Door             █░░
  493.       █      (S)hell to Dos        █       (EDIT) Guest List       █░░
  494.       █      (J)oin Conference     █       (UTIL)ities             █░░
  495.       █      (Q)uit Conference     █       (I)nfo on Host          █░░
  496.       █      (X)pert Mode          █       (C)olor on/off          █░░
  497.       █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█       (P)age SysOp            █░░
  498.          ░░░░░░░░░░░░░░░░░░░░░░░░░░█       (H)elp on Menus         █░░
  499.                                    █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░
  500.                   (G)oodbye           ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
  501.  
  502.  
  503.         (D)ownload - Sends a file from Executive Host to you.  The SysOp may
  504.     download from anywhere on the system by using a full path.  The SysOp
  505.     may also use wildcards (i.e. *.*) when downloading with batch
  506.     protocols.
  507.  
  508.     (U)pload - Sets Executive Host up to receive a file from you.  The
  509.     SysOp may also upload files to anywhere on the system by using a full
  510.     path (i.e. C:\LOTUS\BUSINESS.WKS).  If you use Zmodem, you will not be
  511.     able to upload with a full path since the protocol grabs the filename
  512.     from the remote site.
  513.  
  514.     (F)ile Directories - Gives a list of all files available for download,
  515.     with file names, sizes, dates, and descriptions.  After each screen is
  516.     filled, the display will pause until <Enter> is pressed.  If filelists
  517.     have not been set-up by the SysOp, only names, sizes, dates, and
  518.     transfer times will be displayed to the caller.
  519.  
  520.  
  521.  
  522.  
  523.  
  524.  
  525.  
  526.  
  527.  
  528.  
  529.  
  530.                                                                      page 7
  531. ---------------------------------------------------------------------------
  532.  
  533.  
  534.  
  535.  
  536.     (V)iew - The (Z) sub-option will view any Zip file in the main or
  537.     uploads directory of Executive Host.  A guest may also view text files
  538.     that are compressed inside of the zip file.  The (T) sub-option will
  539.     allow a guest to view any text file that the SysOp has made available.
  540.     A directory of text files available for view can be found with the (F)
  541.     option from the main menu, and then the (T) sub-option.  The (S)ysOp
  542.     view sub-option allows the SysOp to view any text file, anywhere on the
  543.     system.
  544.  
  545.     (T)ext Search - This option allows the caller to do a text search of
  546.     the filelists made available by the SysOp.  Searches for specific text,
  547.     file names, portions of file names, or even dates (in the correct format)
  548.     are allowed.  Wildcards (* or ?) will be searched for literally and should
  549.     not be used.  If the SysOp has not set-up filelists, this option may not
  550.     be performed.
  551.  
  552.     (J)oin Conference - This option allows callers to join (or enter)
  553.     a conference area.  Conference areas may have their own level of
  554.     security (minimum access level), file areas, and message base,
  555.     depending on how the SysOp chooses to set them up.
  556.  
  557.     (Q)uit Conference - This option returns the caller to the Main
  558.     conference area (the area all callers are in when they first log on).
  559.     This command is used by callers when they are wish to return to the
  560.     Main conference after using the (J)oin command.
  561.     
  562.     (X)pert Mode - This will make Executive Host stop displaying the main,
  563.     protocol, and message menus.
  564.  
  565.     (M)essage Menu - This option displays the five message options
  566.     available for all callers. They are as follows:
  567.     (E)nter a message
  568.     (R)ead messages
  569.     (N)ote to SysOp
  570.     (J)oin Conference
  571.     (Q)uit Conference
  572.     All of the menu choices on the message menu may also be executed from
  573.     the main menu, even though some are not listed.
  574.  
  575.     (B)ulletins - Displays a menu of bulletins callers may view.
  576.  
  577.     (O)pen Door - Displays a menu of doors that may be entered.
  578.     
  579.     (UTIL) Host Utilities - This option allows the use of four SysOp
  580.     utilities.  These utilities are:
  581.  
  582.  
  583.  
  584.  
  585.  
  586.  
  587.  
  588.  
  589.  
  590.  
  591.  
  592.  
  593.  
  594.  
  595.  
  596.                                                                      page 8
  597. ---------------------------------------------------------------------------
  598.  
  599.  
  600.  
  601.  
  602.     (S)hell to DOS - This allows the SysOp to shell to dos from remote.
  603.     This option may be used when in local mode, but the F2 key is probably
  604.     a better choice in this case.  The remote shell may be executed without
  605.     using the "UTIL" option by just entering "S" from the main menu. The
  606.     Host will shell to DOS using one of three methods.  First, if the
  607.     DOORWAY.EXE file is detected in the Telix directory, the Host will
  608.     create a DOOR.SYS file and drop to DOS using this excellent redirection
  609.     program.  Doorway will allow the SysOp to run any program from remote
  610.     that does not run in graphics mode.  This includes most word-processors,
  611.     databases, and spreadsheets.  Doorway is share-ware, and the latest
  612.     version is available on most good BBS's as DRWY220.ZIP.
  613.  
  614.     If you need support for running graphic programs from remote, you will
  615.     have to buy a commercial program such as PC-Anywhere, Carbon Copy, or
  616.     Commute.  Any of these programs can be executed successfully from the
  617.     Executive Host remote shell.  Consult the documentation of these
  618.     programs on how to run them in the carrier detect startup mode.
  619.  
  620.     If Doorway is not detected, then the Host will search for the file
  621.     DROP.BAT.  The SysOp may modify this file to use the redirection
  622.     program/method of his choice (i.e. Gateway, PC-Anywhere, Commute).  If
  623.     this file is found, the Host will run it to perform the remote shell.
  624.     NEW FEATURE!!! - Beginning with v1.7, Executive Host now swaps
  625.     completely out of Telix when executing the remote shell.  This means
  626.     that you will have nearly your entire system memory available to
  627.     run programs from remote.  Swapping completely out of Telix requires
  628.     that the communications port be reset.  This is done by running
  629.     RESET.EXE (an Executive Host utility) in the first line of the
  630.     DROP.BAT file.  In addition, the BOARD.BAT file must be executed
  631.     in the last line of the DROP.BAT file, in order to reload Executive
  632.     Host after the remote shell.  An example DROP.BAT file is listed
  633.     below.  This example is the default DROP.BAT file that Executive
  634.     Host creates automatically when DOORWAY.EXE is detected in the
  635.     Telix directory.
  636.  
  637.     RESET.EXE
  638.     DOORWAY SYS /O:t /L: /G:ON /V:D /B:M /C:Dos
  639.     C:
  640.     CD \TELIX
  641.     BOARD
  642.  
  643.     If DOORWAY.EXE and DROP.BAT are both not found, the Host will use
  644.     the DOS CTTY redirection function to allow the SysOp to shell from
  645.     remote.  The SysOp will not be able to run most programs, but will be
  646.     able to use DOS programs and commands, pkzip/pkunzip, and other programs
  647.     that do not write directly to the screen.
  648.  
  649.     (R)ead Host Caller's Log - Allows the remote view of the host caller's
  650.     log, which is a text record of everything that takes place on the host.
  651.     The caller's log is also where the caller's registration information is
  652.     stored.
  653.  
  654.     (D)OS Command Line - Allows the execution of dos commands without
  655.     having to drop to DOS.
  656.  
  657.  
  658.  
  659.  
  660.  
  661.  
  662.                                                                      page 9
  663. ---------------------------------------------------------------------------
  664.  
  665.  
  666.  
  667.  
  668.     (EDIT) Guest List - The guest list is the file that contains the list
  669.     of users of the host.  This command allows the SysOp to directly modify
  670.     the security levels of callers, even from remote.
  671.     The sub-options for this command are:
  672.  
  673.       (V)iew Guest List - Allows the SysOp to view the current list of
  674.       callers along with their current status (security), and their password.
  675.  
  676.       (A)dd a new guest to list - This option allows the SysOp to add a new
  677.       caller's name and password to the guest list.  The new caller is given
  678.       full guest access to the Host (level 5).
  679.  
  680.       (C)hange Caller's Security Level - This option will allow the SysOp
  681.       to change a caller's access level and set it from (1-8).
  682.  
  683.       (D)eny a Guest Access to Host - This in effect "locks-out" a caller.
  684.       In other words, his access level is set to 0, and when he calls and
  685.       enters his correct password he will be immediately disconnected.
  686.  
  687.       (S)uspend Download privileges - This options will suspend all the
  688.       downloading privileges of a caller by setting his access level to 4.
  689.  
  690.       (T)urn off Host - Shuts down the host from remote.  When this option
  691.       is chosen, the SysOp will be prompted to decide which environment the
  692.       host should quit to (Telix or DOS).  By quitting to DOS, the SysOp
  693.       may return to a batch file process.
  694.  
  695.  
  696.     (I)nfo on Host - Displays the Executive Host information screen.
  697.  
  698.     (C)olor On/Off - This will allow the caller to switch between ascii
  699.     and color menus.
  700.  
  701.     (P)age - If the page is turned on, this will page the SYSOP for 20
  702.     seconds.
  703.  
  704.     (H)elp - Will display a menu command help file.
  705.  
  706.     (G)oodbye - This will log you off, and set Executive Host up for
  707.     another caller.
  708.     
  709.  
  710.  
  711.  
  712.  
  713.  
  714.  
  715.  
  716.  
  717.  
  718.  
  719.  
  720.  
  721.  
  722.                                                                     page 10
  723. ---------------------------------------------------------------------------
  724.  
  725.  
  726.  
  727.  
  728.     DESCRIPTIONS OF THE GUEST'S MENU COMMANDS:
  729.  
  730.                  █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  731.                  █  Executive Host  █░░     █▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  732.                  █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░     █  Guest Menu  █░░
  733.                     ░░░░░░░░░░░░░░░░░░░     █▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░
  734.                                                ░░░░░░░░░░░░░░░
  735.        █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  736.        █      (D)ownload File          █░░
  737.        █      (U)pload File         █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  738.        █      (F)ile Directories    █       (M)essage Menu          █░░
  739.        █      (V)iew File           █       (B)ulletins             █░░
  740.        █      (T)ext Search         █       (O)pen Door             █░░
  741.        █      (J)oin Conference     █       (I)nfo on Host          █░░
  742.        █      (Q)uit Conference     █       (C)olor on/off          █░░
  743.        █      (X)pert Mode          █       (N)ote to Sysop         █░░
  744.        █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█       (P)age SysOp            █░░
  745.           ░░░░░░░░░░░░░░░░░░░░░░░░░░█       (H)elp on Menus         █░░
  746.                                     █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░
  747.                    (G)oodbye           ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
  748.  
  749.  
  750.     The Guest menu is identical to the SysOp menu except for the
  751.     substitution of the (N)ote to SysOp command in the place of the SysOp
  752.     (UTIL)ities command.  The (N)ote to SysOp command will allow a
  753.     caller to leave a message to the sysop, no matter what the caller's
  754.     security level.  If a caller's security level 2 or below, the message
  755.     is automatically marked as private E-mail.
  756.  
  757.  
  758.     DESCRIPTIONS OF THE MESSAGE MENU COMMANDS:
  759.  
  760.               █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█      █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  761.               █  Executive Host  █░░    █  Message Menu  █░░
  762.               █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░    █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░
  763.                  ░░░░░░░░░░░░░░░░░░░       ░░░░░░░░░░░░░░░░░
  764.  
  765.                     █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
  766.                     █                               █░░
  767.                     █       (E)nter a Message       █░░
  768.                     █       (R)ead Messages         █░░
  769.                     █       (N)ote to SysOp         █░░
  770.                     █       (J)oin Conference       █░░
  771.                     █       (Q)uit Conference       █░░
  772.                     █                               █░░
  773.                     █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█░░
  774.                        ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
  775.                                    
  776.                          (H)elp on Message Menu
  777.  
  778.     (E)nter Message - Allows callers with access level 3 or above to
  779.     leave a private or public message.  Public messages may be addressed
  780.     to a specific person, or to "ALL".  Callers with access level 2 or
  781.     below may only leave private mail addressed to the SysOp.
  782.  
  783.     (R)ead Messages - Allows callers to read mail addressed to them, and
  784.     also read all messages in the conference marked as public mail.
  785.  
  786.     The (N)ote to SysOp, (J)oin Conference, and (Q)uit Conference commands
  787.     are identical to those found on the main guest and sysop menus.
  788.  
  789.  
  790.  
  791.  
  792.                                                                     page 11
  793. ---------------------------------------------------------------------------
  794.  
  795.  
  796.  
  797.  
  798.     SYSOP'S FUNCTION KEYS (ON-LINE COMMANDS):
  799.  
  800.     The SysOp has eight commands on the function keys that may be executed
  801.     while a caller is on-line, or while in the local logon mode.  The SysOp
  802.     may toggle the list of commands on the status line by using the up and
  803.     down arrow keys.
  804.  
  805.     F1 Key - Kill User - This function will hang-up on the current caller
  806.     immediately with no warning or comment.
  807.  
  808.     F2 Key - Dos Functions - This function will bring up the Telix Dos
  809.     functions window where the SysOp may drop to dos, perform a directory,
  810.     etc.
  811.  
  812.     F3 Key - This key will initiate chat with the current caller.
  813.  
  814.     F4 Key - This key will allow the SysOp to edit the user file
  815.     (EXECHOST.USR) file with a text editor, while the caller waits on-line.
  816.  
  817.     F5 Key - This key will raise the caller's access level (temporarily) to
  818.     the SysOp level (level 9).
  819.  
  820.     F6 Key - This key will set the caller's access level (temporarily) to
  821.     access level 5 (full guest access).
  822.  
  823.     F7 Key - This key will increase the caller's on-line time in 5-minute
  824.     increments.
  825.  
  826.     F8 Key - This key will decrease the caller's on-line time in 5-minute
  827.     decrements.
  828.  
  829.     F9 Key - This key toggles the page on/off switch.  If this switch is
  830.     on callers will be able to page the SysOp.  If it is turned off, the
  831.     caller will be instructed to leave a message.
  832.  
  833.     F10 Key - This key displays the SysOp's full-screen help.  It does not
  834.     interfere with the caller, and the caller cannot see the help message.
  835.  
  836.  
  837.     HOST SECURITY LEVELS:
  838.     Level 0 - Caller is "locked-out" of the Host and will have no access.
  839.     Level 1 - Callers may read mail, view bulletins and info screen, page
  840.               the SysOp, or leave a private message to the SysOp.
  841.     Level 2 - Same as 1, but may also view filelists and perform a text
  842.               search on filelists.
  843.     Level 3 - Same as 2, but may also enter public messages and upload files.
  844.     Level 4 - Same as 3, but has access to doors and may view files.
  845.     Level 5 - Caller has full guest privileges including the ability to
  846.               download files.
  847.     Level 6 - Same access as 5, but higher conference security.
  848.     Level 7 - Same access as 5, except for time allowed online.  If the
  849.               SysOp is not giving all callers unlimited time, this level
  850.               will always be given 60 minutes access.  Also higher
  851.               conference security.
  852.     Level 8 - Same access as 5, except this caller will always have an
  853.               unlimited amount of access time.  Also higher conference
  854.               security.
  855.     Level 9 - SysOp status.  Caller has full access to all SysOp functions.
  856.  
  857.  
  858.  
  859.  
  860.                                                                     page 12
  861. ---------------------------------------------------------------------------
  862.  
  863.  
  864.  
  865.  
  866.     Access level 9 may not be assigned via the Guest List Editor.  In order
  867.     to assign this powerful level to a caller other than yourself, you
  868.     must edit the EXECHOST.USR file with your text editor.  It is highly
  869.     recommended that you not give anyone an access level 9 other than
  870.     yourself.  Access level 9 will give the caller complete access to your
  871.     system, and disastrous results could occur either by accident or on
  872.     purpose.
  873.  
  874.  
  875.     EDITING THE EXECHOST.USR FILE:
  876.  
  877.     Here is one example of an Executive Host Guest List File (exechost.usr).
  878.  
  879.                ⌐-----------------  User's Name
  880.                |       ⌐---------  User's Password
  881.                |       |   ⌐-----  User's Security Level
  882.                |       |   | ⌐---  User's Data Number (used in execmail.dat)
  883.                |       |   | |
  884.                |       |   | |     (semicolons used as dividers)
  885.                |       |   | |
  886.                |       |   | |
  887.           John Wright;host;9;1              << SysOp >>
  888.           Edward Williams;dud;5;2           << Guest >>
  889.           Brent Taft;whipped;5;3            << Guest >>
  890.           Jay Fuller;guy;5;4                << Guest >>
  891.           Jack Ripper;nut;5;5               << Guest >>
  892.           Bob Coffey;pup;5;6                << Guest >>
  893.           Claude Hammond;smart;5;7          << Guest >>
  894.  
  895.  
  896.     Access Levels may be changed by directly modifying this file with a
  897.     text editor.  This is the only way you will be able to assign access
  898.     level 9 to a user.
  899.     In most cases, the easiest way to change access levels is by using the
  900.     on-line guest list editor.  Once logged on either local or from remote,
  901.     enter "edit" from the main menu.
  902.  
  903.     
  904.     THE MESSAGE BASE AND HOW IT WORKS:
  905.  
  906.     The message base combines public messages and private E-mail into
  907.     one secure message system.  Each message base has its own index file
  908.     for added speed and ease of use.
  909.  
  910.     The message base uses the message data numbers assigned to each
  911.     user in the EXECHOST.USR file.  The data numbers are added sequentially
  912.     to the file EXECMAIL.DAT, where the user's message information is stored.
  913.     Two important bits of information are stored here.  The first is the
  914.     number of the user's last message read.  This is stored in order to give
  915.     the caller an idea of where he left off from the last time he read
  916.     messages.  The second bit of information is the number of the last public
  917.     message addressed to the user.  When a caller logs on, the Host looks at
  918.     the message data file, and compares the last message read with the last
  919.     message sent to the user.  This way the Host is able to quickly determine
  920.     if the user has new mail, without having to scan the entire message base.
  921.  
  922.  
  923.  
  924.  
  925.  
  926.                                                                     page 13
  927. ---------------------------------------------------------------------------
  928.  
  929.  
  930.  
  931.  
  932.     This quick scan is performed for each conference in which the caller has
  933.     access (if conferences have been setup), and the caller is notified of
  934.     which conferences he has mail waiting.
  935.  
  936.     Messages written to or from the caller may be deleted by choosing
  937.     (k)ill at the bottom of the message.  The SysOp may delete any public
  938.     message.  Note:  This function does not actually delete the message from
  939.     the message base, but simply marks it as deleted so callers are unable to
  940.     read it.  PACK.EXE must be run to strip these deleted messages from the
  941.     message base.  It is recommended that SysOps run PACK.EXE at least once
  942.     a week (or in the daily event) in order to trim down the size of the
  943.     message base and speed up it's operation.  Read the file PACK.DOC for
  944.     more information on PACK.EXE.
  945.  
  946.  
  947.     Example of the EXECMAIL.DAT file:
  948.  
  949.             ⌐-------    Message Data Number
  950.             |   ⌐---    User's Last Message Read (public message)
  951.             |   |     ⌐ Number of Last Message Sent to User (public message)
  952.             |   |     |
  953.             |   |     |      (semicolons user as dividers)
  954.           001;000040;000038
  955.           002;000039;000012
  956.           003;000040;000033
  957.           004;000022;000007
  958.           005;000035;000004
  959.  
  960.  
  961.     ADDING FILES TO YOUR HOST SETUP:
  962.  
  963.     If you are running the program as a public access BBS, or just as a
  964.     semi-private host, you will be sure to want to make available certain
  965.     programs for download.  Of course the SysOp may download from anywhere
  966.     on the system, but guest callers may download from only the upload and
  967.     download directories.  Therefore, in order to make programs available to
  968.     all callers, they must be copied into one of these directories.
  969.     The arrangement makes no difference;  all files may be in the uploads
  970.     directory, all files may be in one of the download directories, or any
  971.     combination is fine and the Host will find them all.
  972.     ** NEW!! **
  973.     Beginning with version 1.6, any valid path on the computer system may
  974.     be used as a download directory.  In order for the Host to recognize
  975.     them properly they must be listed in a file named DOWNLOAD.LST.  i.e.
  976.  
  977.     << Beginning of File >>
  978.     C:\GAMES\
  979.     D:\UTILS\
  980.     E:\CDROM1\
  981.     E:\CDROM2\
  982.     etc, etc....
  983.     <<   End of File    >>
  984.  
  985.  
  986.  
  987.  
  988.  
  989.  
  990.  
  991.  
  992.                                                                     page 14
  993. ---------------------------------------------------------------------------
  994.  
  995.  
  996.  
  997.  
  998.     There is no limit to the number of paths that may be used as download
  999.     directories for your callers.  WARNING!!  Do not add your Telix directory
  1000.     to this list, since this would compromise your system security.
  1001.  
  1002.     If you are using filelists with descriptions, initially just copy your
  1003.     new files to a download directory.  Then use the Host Filer to add these
  1004.     filenames to your filelists (Option A).  After your initial set-up
  1005.     it is a good idea to add new programs to the filelists prior to
  1006.     copying them into the download directories.  The easiest and most
  1007.     efficient way to do this is to first separate new files into categories
  1008.     represented by your filelists.  For example, copy all of your new
  1009.     utility files into a temporary directory.  Then use option A to add the
  1010.     new files to your utility filelist.  This will allow you to enter a path
  1011.     such as "C:\TEMP\*.ZIP", instead of adding each file individually.  All
  1012.     that is left is to copy the files into a valid download directory,
  1013.     delete the original files in the temp directory, and start your new
  1014.     category.
  1015.  
  1016.  
  1017.     INSTALLING DESCRIPTION FILES - Executive Host works fine using only
  1018.     physical (DOS) file directories, however most SysOps who want to run a
  1019.     serious bbs will want to use a series of filelists that will display the
  1020.     filenames, dates, and descriptions.  Executive Host has an advanced filer
  1021.     built in, and filelists can be setup easily as follows.
  1022.  
  1023.     1.  Decide how many different filelists you wish to use, and enter their
  1024.     names and numbers in the directory data file DIR.DAT.
  1025.  
  1026.     2.  If you want to use only one big filelist, the DIR.DAT file
  1027.     is not necessary.  Just name the filelist MAIN.DIR, and the
  1028.     host will use it.
  1029.  
  1030.     3.  If you use the DIR.DAT file, you must also use the file called
  1031.     DIRLIST.  This file is the menu that will be displayed whenever a
  1032.     caller chooses to view the filelists, and should contain the menu
  1033.     of filelists with their corresponding number.  An ansi color directory
  1034.     menu file may also be used and must be called DIRLISTG.  Ansi colors
  1035.     are automatically added to DIRLIST if this file is not present.
  1036.  
  1037.     4.  A Recent Uploads filelist should also be created and must be
  1038.     called NEW.DIR.  This file is where the descriptions of files
  1039.     uploaded by callers will be added.  It is recommended that files be
  1040.     rotated out of the Recent Uploads directory after about a week's time,
  1041.     but that is up to the SysOp.
  1042.  
  1043.     5.  Once the data file has been setup and each filelist has been created,
  1044.     the Host Filer (F6) will recognize your setup and allow you to edit and
  1045.     modify these files when necessary.  All files must be in the Telix
  1046.     directory.  Example files of the DIR.DAT, DIRLIST and DIRLISTG files are
  1047.     included in the file EXAMPLES.ZIP.
  1048.  
  1049.     6.  Ansi colors are added to the filelists automatically, so a separate
  1050.     ansi file is not necessary.
  1051.  
  1052.  
  1053.  
  1054.  
  1055.  
  1056.  
  1057.  
  1058.                                                                     page 15
  1059. ---------------------------------------------------------------------------
  1060.  
  1061.  
  1062.  
  1063.  
  1064.     INSTALLING BULLETINS - The set-up for bulletins is similar to the
  1065.     setup for filelists and is done as follows:
  1066.  
  1067.     1.  If you wish to use only one bulletin file, name it BULLETIN, and
  1068.     the Host will display it when a caller selects the view bulletins
  1069.     option.  An ansi bulletin may also be displayed for callers who choose
  1070.     color.  This file must be called BULLTING.
  1071.  
  1072.     2.  If you wish to set-up multiple bulletins, you must use a data file
  1073.     similar to the filelist data file.  Enter each bulletin's name and
  1074.     number in the file BULLETIN.DAT.
  1075.  
  1076.     3.  If you are using multiple bulletins, you must modify the file
  1077.     BULLLIST, which is the menu displayed to callers that shows the
  1078.     available bulletins, and their corresponding number  The file
  1079.     BULLLIST.G may also be used to display a color bulletin menu.  Ansi
  1080.     colors are automatically added if this file is not found.
  1081.  
  1082.     4.  Create each bulletin with your text editor, and put them in the
  1083.     host directory.  Ansi is added automatically to the bulletins unless
  1084.     you wish to make separate ansi bulletins.  You may do this by adding a
  1085.     "G" to the end of the bulletin file name.  For example, the ansi
  1086.     bulletin for the file RULES, should be RULESG.  Note that the
  1087.     bulletin name may not be longer than 7 characters long if an ansi
  1088.     version of the bulletin is to be used.
  1089.  
  1090.     5.  Once all of this has been completed, your bulletins, menu, and data
  1091.     file may be modified in the SysOp's Utilities Window (F5) at the waiting
  1092.     for call screen.
  1093.  
  1094.  
  1095.     INSTALLING DOORS - The set-up of doors is also similar to the set-up of
  1096.     bulletins and filelists, and is done as follows:
  1097.  
  1098.     1.  If you wish to have only one door on-line, then create a file
  1099.     called DOOR.BAT that will run the door.  DOOR.BAT will be run
  1100.     whenever a caller chooses the (O)pen Door option.
  1101.  
  1102.     2.  If you wish to use multiple doors, modify the file DOOR.DAT with
  1103.     the batch file name and corresponding number of each door.
  1104.  
  1105.     3.  Also modify the door menu file DOORLIST, which is displayed to
  1106.     the caller when the (O)pen Door option is chosen.  The file
  1107.     DOORLIST.G may be used to create a color door menu to callers.  Ansi
  1108.     colors are automatically added if this file is not found.
  1109.  
  1110.     4.  Create the batch file for each door to be run.  FISHING.BAT is an
  1111.     example of a batch file for an RBBS door.
  1112.  
  1113.     5.  Once the above has been accomplished, the door batch files, menu,
  1114.     and data file may be modified from the SysOp's Utilities window (F5) at
  1115.     the waiting for call screen.
  1116.  
  1117.  
  1118.  
  1119.  
  1120.  
  1121.  
  1122.  
  1123.  
  1124.                                                                     page 16
  1125. ---------------------------------------------------------------------------
  1126.  
  1127.  
  1128.  
  1129.  
  1130.     6.  Two files are created when a door is opened, a GAP BBS compatible
  1131.     DOOR.SYS file which is recognized by Gap door programs and Doorway, and
  1132.     the DORINFO1.DEF file, which is recognized by RBBS compatible doors,
  1133.     and some QBBS doors.
  1134.  
  1135.     7.  IMPORTANT!:  Beginning with version 1.7, Executive Host swaps
  1136.     completely out of Telix to execute door programs.  For this reason,
  1137.     and in order to reset the computer's communications port, the
  1138.     RESET.EXE program must be run in each door batch file.  RESET.EXE
  1139.     should be the first command executed in each door batch file,
  1140.     otherwise the some doors may become confused and.  In addition,
  1141.     since Telix is completely swapped out when running doors, in order
  1142.     to reload the host system, the board.bat file must be run as the last
  1143.     line in ALL door batch files.  An example door batch file for the
  1144.     Kannons and Katapults door game is listed below.
  1145.  
  1146.     RESET.EXE
  1147.     CD KNK
  1148.     KNK C:\TELIX\DORINFO1.DEF
  1149.     CD \TELIX
  1150.     BOARD.BAT
  1151.  
  1152.     Notice that RESET.EXE is the first command in the batch file, and that
  1153.     BOARD.BAT is the last command.  It is very important that all door
  1154.     batch files are setup similarly.
  1155.  
  1156.  
  1157.     INSTALLING CONFERENCES - The setup of conferences in Executive Host
  1158.     was new to version 1.6, and can add much power and flexibility to the
  1159.     host system.  Setup of conferences is listed on a step-by-step basis
  1160.     below.  There are four main steps.
  1161.  
  1162.     1.  Create the conference subdirectory with the DOS "MD" command.
  1163.     Conference subdirectories are where the conference messages and other
  1164.     data files are stored, and these subdirectories must branch directly
  1165.     off of the Telix directory.  For example, to create a subdirectory for
  1166.     the SYSOP conference, you would type "MD SYSOP" from the Telix
  1167.     subdirectory.  Although conference subdirectories do not have to be
  1168.     named the same as the conference name, it is probably a good idea to
  1169.     do so.
  1170.  
  1171.     2.  Add the conference setup information to the file CONF.DAT.  This
  1172.     is where the conference name, number, and other important information
  1173.     are stored.  The format of this file is shown below:
  1174.  
  1175.     1;SysOp                   <--   number and name of conference       (1)
  1176.     SYSOP\                    <--   conference directory                (2)
  1177.     C:\TELIX\DOWN\            <--   conference download directory       (3)
  1178.     C:\TELIX\UP\              <--   conference upload directory         (4)
  1179.     6                         <--   minimum access level for conference (5)
  1180.  
  1181.     Line one contains the conference number and name.  Be sure to limit
  1182.     your conference name to less than 30 characters.
  1183.  
  1184.  
  1185.  
  1186.  
  1187.  
  1188.  
  1189.  
  1190.                                                                     page 17
  1191. ---------------------------------------------------------------------------
  1192.  
  1193.  
  1194.  
  1195.  
  1196.     Line two contains the name of the conference directory that you just
  1197.     created using the DOS "MD" command.  Do not use the full path, i.e.
  1198.     "C:\TELIX\SYSOP\".  Enter the path in the exact format as shown above.
  1199.     Line three contains the conference download directory.  This may be
  1200.     the same or different from the main download directory setup in the
  1201.     Host configuration.
  1202.     Line four contains the conference upload directory.  This path may
  1203.     also be the same or different than the main upload directory setup in
  1204.     the Host configuration.
  1205.     Line five contains the minimum access level of callers that will be
  1206.     admitted into the conference.
  1207.     Be sure to end all paths with a "\" backslash, as shown above.
  1208.     More conferences are added to the CONF.DAT file in the same manner,
  1209.     by listing this information below the last conference.  An example
  1210.     of the CONF.DAT file with setups for three conferences is included
  1211.     in the file EXAMPLES.ZIP.
  1212.  
  1213.     3.  Next create or edit the CONFMENU and CONFMENU.G files.
  1214.     These are the conference menu files that will be displayed to callers
  1215.     when they select the (J)oin Conference option from the main menu.
  1216.     These files, along with the CONF.DAT file must be present in the Telix
  1217.     directory in order for the Host to recognize that conferences have
  1218.     been setup properly.  Examples of both of these files are also included
  1219.     in EXAMPLES.ZIP.
  1220.  
  1221.     4.  Special conference files and menus may now be added to the
  1222.     conference directory.  Conference specific setups for bulletins, doors,
  1223.     and filelists may be created for each conference.  For example, if the
  1224.     Host found the files DIRLIST/DIRLIST.G and DIR.DAT in a conference
  1225.     directory, it would use this filelist setup when callers are in this
  1226.     conference only.  The SysOp can setup bulletins, filelists and doors
  1227.     in each conference, EXACTLY as was done for the Main conference.
  1228.     By limiting the access of callers admitted into conferences, the SysOp
  1229.     can thus create private conferences with their own file areas, doors,
  1230.     bulletins and message bases.  In addition, the SysOp may design
  1231.     different menus for each conference, and place them in the conference
  1232.     directory, if so inclined.
  1233.  
  1234.     The following files may be placed in the conference directory as
  1235.     substitutes for the files and menus in the Telix directory:
  1236.  
  1237.     OPEN             *
  1238.     OPENG            *
  1239.     NEWS             *
  1240.     NEWSG            *
  1241.     DIR.DAT
  1242.     DIRLIST
  1243.     DIRLISTG
  1244.     DOOR.DAT
  1245.     DOORLIST
  1246.     DOORLIST.G
  1247.     BULLETIN.DAT
  1248.     BULLLIST
  1249.     BULLLIST.G
  1250.  
  1251.  
  1252.  
  1253.  
  1254.  
  1255.  
  1256.                                                                     page 18
  1257. ---------------------------------------------------------------------------
  1258.  
  1259.  
  1260.  
  1261.  
  1262.     Executive Host v1.7 also supports different menus in each
  1263.     conference.  These files, of course, are not necessary, but if
  1264.     you wish to have different menus in each conference, it is now
  1265.     possible.  Of course, you must have a registered version of
  1266.     Executive Host to utilize custom menus.
  1267.  
  1268.     Files marked with an asterisk (*) will only be displayed if found in
  1269.     the conference directory.  If any of the other files are not found in
  1270.     the conference directory, the identical files in the Telix directory
  1271.     will be used.  In other words, the Main conference's filelists, bulletins
  1272.     and doors will always be used as a default if the SysOp has not setup
  1273.     special ones for each conference.
  1274.  
  1275.     No other files of any kind should be copied into the conference directory,
  1276.     as they will not be used and will only waste your hard-drive space.
  1277.     In particular, all filelists (dir files), bulletins, and door batch files
  1278.     should be kept in the Telix directory, and full paths are not necessary
  1279.     in the DIR.DAT, DOOR.DAT, and BULLETIN.DAT files.
  1280.  
  1281.  
  1282.     ADDITIONAL SYSTEM SECURITY - V1.7 of Executive Host now allows the
  1283.     SysOp to create and update a 'trashcan' file.  This file should be
  1284.     called TRASHCAN.TXT and is a list of obscene and/or undesirable names
  1285.     that the SysOp wishes to check new callers' names against, when they
  1286.     are first registering.  When a caller first logs in as a new user,
  1287.     his name is checked against the names in the trashcan file.  If the
  1288.     new caller's name matches with any of the undesirable names listed
  1289.     in the file, the caller is disconnected immediately.  This file can be
  1290.     used to weed out obvious undesirable callers with names such as
  1291.     'Hacker', and can also be used to prevent a particular person from
  1292.     registering who has proved to be a problem in the past.  Both single
  1293.     and full names can be added to this file, and should be listed, one on
  1294.     each line, as shown below (case is insignificant):
  1295.  
  1296.     Hacker
  1297.     Jerk
  1298.     Joe Pest
  1299.     BBS Terrorist
  1300.     etc.
  1301.  
  1302.     CALLER REGISTRATION INFORMATION AND SCRIPTS - V1.7 of Executive Host
  1303.     now has an external script questionnaire with a list of questions to
  1304.     be asked of new callers.  This script questionnaire file is named
  1305.     REGISTER.ASK, and can be modified by the SysOp to change the default
  1306.     questions, or add additional questions.  Answers to the new user
  1307.     questionnaire are no longer saved to the EXECHOST.LOG file.  Instead,
  1308.     answers to the REGISTER.ASK file are saved to a file named REGISTER.ANS.
  1309.  
  1310.  
  1311.     THE HOST EVENT - Executive Host will execute the EVENT.BAT file daily,
  1312.     at the hour specified in the Host Configuration.  The default EVENT.BAT
  1313.     file executes the PACK.EXE message base utility, and then runs the
  1314.     BOARD.BAT file to reload the Host.  Additionally, the host deletes
  1315.     the file CALLERS.DAT (internally) immediately after executing the event.
  1316.  
  1317.  
  1318.  
  1319.  
  1320.  
  1321.  
  1322.                                                                     page 19
  1323. ---------------------------------------------------------------------------
  1324.  
  1325.  
  1326.  
  1327.  
  1328.     This file contains information on how much time each caller has left
  1329.     on the BBS for that particular day.  If you are not running your
  1330.     host 24 hours, and the event is not run each day, this file will
  1331.     still need to be deleted, otherwise all active callers will eventually
  1332.     run out of time, and will be unable to login to your system.  The
  1333.     EVENT.BAT file is a perfect place to run optional utilities and
  1334.     perform automatic backup procedures on your system.
  1335.  
  1336.  
  1337.     USING THE HOST UTILITIES - By Pressing the F5 key at the waiting for
  1338.     caller screen, the SysOp may enter the Host Utilities area.  In this
  1339.     area the SysOp may choose from 10 different utility functions (A-J).
  1340.     If conferences have been setup, the conference menu will be displayed,
  1341.     and the SysOp will be asked to select the conference to work out of.
  1342.  
  1343.     ╔══════════════════════════════════════════════════════════════════╗
  1344.     ║                                                                  ║
  1345.     ║                                                                  ║
  1346.     ║                     Sysop's Host Utilities                       ║
  1347.     ║                                                                  ║
  1348.     ║                                                                  ║
  1349.     ║    A>  List Caller's Log               F>  Edit Door List        ║
  1350.     ║                                                                  ║
  1351.     ║    B>  Edit UserFile                   G>  Edit Door Batch Files ║
  1352.     ║                                                                  ║
  1353.     ║    C>  Edit Bulletin List              H>  Edit Door Data File   ║
  1354.     ║                                                                  ║
  1355.     ║    D>  Edit Bulletins                  I>  Test-Run Door         ║
  1356.     ║                                                                  ║
  1357.     ║    E>  Edit Bulletin Data File         J>  DOS Command Line      ║
  1358.     ║                                                                  ║
  1359.     ║                                                                  ║
  1360.     ║             Choose a Utility Option? <Enter>=quit ->             ║
  1361.     ║                                                                  ║
  1362.     ║                                                                  ║
  1363.     ╚══════════════════════════════════════════════════════════════════╝
  1364.  
  1365.     (A) - List Caller's Log.  This option will use the LIST.COM file
  1366.     browsing utility to view the Host caller's log.  A copy of List.com must
  1367.     be located in the Telix directory.  V. Buerg's more advanced list.com
  1368.     may be substituted in the place of the list program distributed with
  1369.     Executive Host.
  1370.  
  1371.     (B) - Edit UserFile.  This option will use the text editor defined in
  1372.     Telix to edit the Host's user database.  Callers' passwords and
  1373.     security may be manually changed using this option.  Be careful to
  1374.     not alter the structure or order of this file, otherwise the host
  1375.     will report an error.
  1376.  
  1377.     (C) - Press C to bring up the bulletin menu file in your text editor.
  1378.     This is the file that shows callers the bulletins available for view.
  1379.     If this file is modified, and you are also using the file BULLLIST.G
  1380.     to display a color menu, you will have to make the necessary changes to
  1381.     it also.
  1382.  
  1383.  
  1384.  
  1385.  
  1386.  
  1387.  
  1388.                                                                     page 20
  1389. ---------------------------------------------------------------------------
  1390.  
  1391.  
  1392.  
  1393.  
  1394.     (D) - Option D will allow the editing of each bulletin that is set-up
  1395.     in the bulletin data file (BULLETIN.DAT).  First you will be displayed
  1396.     the bulletin menu, from which you must select which bulletin to edit.
  1397.  
  1398.     (E) - Option E allows will bring up the bulletin data file in your text
  1399.     editor.  This is the file that tells the host, which bulletins to read,
  1400.     and their respective numbers.
  1401.  
  1402.     (F) - Option F will allow the editing of the door menu file DOORLIST.
  1403.     This is the menu of all doors available for callers, and is displayed
  1404.     when a caller enters "O" for open door.  If you are using the file
  1405.     DOORLIST.G.
  1406.  
  1407.     (G) - Choosing option G will allow you to edit any of your batch files
  1408.     that execute doors.  The Host will display your door menu, in order for
  1409.     you to select the batch file to edit, and will then bring up the batch
  1410.     file you choose in your text editor.
  1411.  
  1412.     (H) - Option H allow you to edit the door data file, which contains the
  1413.     number and name of each door available for callers to use.
  1414.  
  1415.     (I) - This option will test-run any of the doors that you have set-up
  1416.     in the door data file.  It will display your door menu, and ask you to
  1417.     select a door to test-run.  Once you have done this it will run the
  1418.     door's batch file, and allow you to test your set-up and installation
  1419.     of doors.
  1420.  
  1421.     (J) - DOS Command Line - This option will allow the SysOp to run a
  1422.     specific application without dropping to DOS.  A Drop to DOS may be
  1423.     accomplished by pressing the <Enter> or <ESC> key from the DOS command
  1424.     Line.
  1425.  
  1426.  
  1427.     USING THE HOST FILER - By pressing the F6 key at the waiting for caller
  1428.     screen, the SysOp may enter the Host Filer area.  In this area the
  1429.     SysOp may choose from 10 different Filer options also (A-J).
  1430.     If conferences have been setup, the conference menu will be displayed,
  1431.     and the SysOp will be asked to select the conference to work out of.
  1432.  
  1433.     ╔══════════════════════════════════════════════════════════════════╗
  1434.     ║                                                                  ║
  1435.     ║                      Executive Host Filer                        ║
  1436.     ║                                                                  ║
  1437.     ║    A>  Add New Files to Filelist       F>  Verify Filelist       ║
  1438.     ║                                                                  ║
  1439.     ║    B>  Auto-Describe Filelist          G>  Sort Filelist         ║
  1440.     ║                                                                  ║
  1441.     ║    C>  Edit Filelist Menu              H>  Run Editor            ║
  1442.     ║                                                                  ║
  1443.     ║    D>  Edit Filelist                   I>  Run List.com          ║
  1444.     ║                                                                  ║
  1445.     ║    E>  Edit Filelist Data File         J>  DOS Command Line      ║
  1446.     ║                                                                  ║
  1447.     ║                                                                  ║
  1448.     ║              Choose a Filer Option? <Enter>=quit ->              ║
  1449.     ║                                                                  ║
  1450.     ╚══════════════════════════════════════════════════════════════════╝
  1451.  
  1452.  
  1453.  
  1454.                                                                     page 21
  1455. ---------------------------------------------------------------------------
  1456.  
  1457.  
  1458.  
  1459.  
  1460.     (A) - The "Add New Files to Filelist" option allows the SysOp to add
  1461.     one or more new files that he has acquired to a filelist.  The SysOp
  1462.     will be asked for the path of the new programs first.  For example
  1463.     "A:*.ZIP" may be entered. Then the SysOp will be asked which filelist
  1464.     to add the new programs to.  The file adder will add these programs
  1465.     to the filelist and allow the manual entry of descriptions by the
  1466.     SysOp.  Also remember to sort the filelist after the new files have
  1467.     been added (Option G).  The new files must of course be copied into the
  1468.     main or uploads directory in order to be available for downloading.
  1469.  
  1470.     (B) - The "Auto-Describe Filelist" option will add descriptions to your
  1471.     filelist from an existing list.  In other words, if you have just
  1472.     used option (A) to add new files to an Executive Host filelist, and you
  1473.     do not want to add all of the descriptions manually, you have another
  1474.     alternative.  You can download or capture a filelist from another BBS,
  1475.     and use this source file to transfer the descriptions to your Host
  1476.     filelist.  This is the purpose of option (B).  The source file may be
  1477.     in any popular bbs format i.e. PCB, RBBS, dBBS, etc.  The SysOp will be
  1478.     asked for the name of the filelist that needs descriptions added.  Next,
  1479.     the name of the source file to be searched must be entered.  Both files
  1480.     must be sorted alphabetically prior to using this option.  A .bak file of
  1481.     the filelist is created in case something goes wrong.  All files must be
  1482.     in the Telix (Host) directory.
  1483.  
  1484.     (C-E) - Allows the editing of filelists, the directory menu file,
  1485.     and the directory data file.
  1486.  
  1487.     (F) - Verify Filelist - This option will verify that all the files in a
  1488.     filelist really exist in either the upload or download directories.
  1489.     If you have a dir file with 75 files, a successful verification result
  1490.     would look like this:
  1491.                              75 files processed.
  1492.                               0 files NOT Found.
  1493.  
  1494.     (G) - Sort Filelist - This option will sort a filelist using the
  1495.     program SORTIT.EXE.  This program sorts filelists alphabetically, while
  1496.     ignoring (not sorting) any filelist information header that may be
  1497.     present.  Filelists may not be larger than 64k in size.  A custom
  1498.     sort program, such as V. Buerg's SORTF.COM may be implemented to sort
  1499.     files larger than 64k.  This is done by deleting the file SORTIT.EXE and
  1500.     creating a batch file named SORTIT.BAT to run the program.  It is a good
  1501.     idea to always keep filelists sorted in order to give callers an orderly
  1502.     display of files available for download.  Also, filelists must be sorted
  1503.     prior to using the "Auto-Describe Filelist" option in the Host Filer.  To
  1504.     sort a file from the dos prompt, simply type "SORTIT [name of filelist]".
  1505.  
  1506.     (H) - Run Editor - This option simply runs the editor defined in Telix
  1507.     without a file name.  Ted.com is run by default if an editor is not
  1508.     defined in Telix.
  1509.  
  1510.     (I) - Run List - This option will run the LIST.COM file browsing utility
  1511.     if it is present in the Telix directory.
  1512.  
  1513.     (J) - DOS command Line - This option is identical to option "J" in the
  1514.     Host Utilities area.  You may enter a DOS command to be executed, or
  1515.     press <Enter> or <Esc> to drop to DOS.
  1516.  
  1517.  
  1518.  
  1519.  
  1520.                                                                     page 22
  1521. ---------------------------------------------------------------------------
  1522.  
  1523.  
  1524.  
  1525.  
  1526.     DOWNLOADING - Downloading may take place from either upload or
  1527.     download directories, and all files in any of these directories are
  1528.     always available for download by all callers with access to the
  1529.     conference.  The SysOp may of course enter a full path and download from
  1530.     anywhere on the system.  Remember that the file DOWNLOAD.LST may be
  1531.     used to make any path on the system a valid Executive Host download
  1532.     directory.
  1533.  
  1534.  
  1535.     UPLOADING - Files uploaded by all callers will be sent to the uploads
  1536.     directory.  In addition the UPLOADS.BAT file will be run if it exists.
  1537.     This batch file could perform various virus checking functions, and
  1538.     integrity checks on the uploaded file(s).  The SysOp may include a full
  1539.     path when uploading, and the file can be sent anywhere on the system.
  1540.  
  1541.  
  1542.     IMPORTANT FILES TO BECOME FAMILIAR WITH - The following files are used
  1543.     in the day to day operation of the Host and their structure and format
  1544.     should be studied by the SysOp.  If they should ever become corrupted
  1545.     or deleted, your knowledge of their structure will ensure that you will
  1546.     be back on-line quickly.
  1547.  
  1548.     System and Message Base Files:
  1549.     exechost.usr - the Host UserFile containing the name, password, and
  1550.                    security levels of all callers.
  1551.     exechost.cnf - the Host configuration data file
  1552.     execmail.dat - the message base data file.
  1553.     message.txt  - the message base text.
  1554.     message.dat  - the message base pointers data file.
  1555.     message.ndx  - the message base index file
  1556.  
  1557.     Executive Host External Menu Files:
  1558.  *  guest.men    - main menu displayed to all callers except sysop
  1559.  *  guestg.men   - ansi version of guest.men
  1560.  *  sysop.men    - main menu displayed to the sysop only
  1561.  *  sysopg.men   - ansi version of sysop.men
  1562.  *  message.men  - message system menu
  1563.  *  messageg.men - ansi version of message.men
  1564.  *  protocol.men - protocol selection menu
  1565.  *  protcolg.men - ansi version of protocol.men
  1566.  *  util.men     - sysop utilities menu
  1567.  *  utilg.men    - ansi version of util.men
  1568.  *  edit.men     - sysop's edit guest list menu
  1569.  *  editg.men    - ansi version of edit.men
  1570.  
  1571.     [*] - these files are not supported in the UNREGISTERED version.
  1572.  
  1573.  
  1574.  
  1575.  
  1576.  
  1577.  
  1578.  
  1579.  
  1580.  
  1581.  
  1582.  
  1583.  
  1584.  
  1585.  
  1586.                                                                     page 23
  1587. ---------------------------------------------------------------------------
  1588.  
  1589.  
  1590.  
  1591.  
  1592.     Other important files:
  1593.     exechost.log - host usage log - contains a log of caller activities on
  1594.                    your host bbs system.
  1595.     register.ask - the script file questionnaire which contains questions
  1596.                    asked of all new callers.
  1597.     register.ans - the answer file containing each new caller's answers
  1598.                    to the questions in the register.ask script file.
  1599.     trashcan.txt - text file containing any obscene or undesirable names
  1600.                    you wish to check new callers' names against before
  1601.                    granting registration.
  1602.     sortit.exe   - program that sorts filelists.
  1603.     reset.exe    - resets communications port before remote shell & doors.
  1604.     pack.exe     - removes deleted mail from each message base and
  1605.                    updates the message index file.
  1606.     list.com     - text file browse utility.
  1607.     drop.bat     - batch file used for remote shell to DOS.
  1608.     upload.bat   - batch file executed whenever a caller uploads a file.
  1609.     event.bat    - batch file run as an "event" at a certain hour each day.
  1610.     board.bat    - runs Executive Host.
  1611.     bimodem.bat  - runs the optional Bimodem protocol program.
  1612.     logon.bat    - executed immediately prior to the open/openg files
  1613.                    being displayed to a caller (if found).
  1614.     logoff.bat   - executed immediately after each caller logs off
  1615.                    the host system (if found).
  1616.     dir.dat      - data file of filelists.
  1617.     door.dat     - data file of door batch files.
  1618.     bulletin.dat - data file of bulletin files available for view.
  1619.     callers.dat  - data file recording on-line time used by callers.
  1620.     conf.dat     - data file with conference information.
  1621.     bulllist     - bulletin menu file displayed to callers.
  1622.     bullist.g    - ansi version of bulllist.
  1623.     dirlist      - directory file menu displayed to callers.
  1624.     dirlistg     - ansi version of dirlist.
  1625.     doorlist     - door menu file displayed to callers.
  1626.     doorlist.g   - ansi version of doorlist.
  1627.     open         - ascii file displayed when caller first logs on.
  1628.     openg        - ansi version of open file.
  1629.     news         - news file that is displayed immediately following
  1630.                    open/openg.
  1631.     newsg        - ansi version of news file.
  1632.     vip          - file displayed to callers with access level 6 or 7
  1633.                    immediately after the news file.
  1634.     vipg         - ansi version of vip file.
  1635.     info         - file displayed when caller chooses (I)nfo on Host.
  1636.     infog        - ansi version of info file.
  1637.     goodbye      - file displayed when caller logs off.
  1638.     goodbyeg     - ansi version of goodbye.
  1639.     newuser      - file displayed after a new caller registers.
  1640.     newuserg     - ansi version of newuser file.
  1641.     uptest       - file that is displayed immediately after an upload.
  1642.     uptestg      - ansi version of uptest file.
  1643.  
  1644.  
  1645.  
  1646.  
  1647.  
  1648.  
  1649.  
  1650.  
  1651.  
  1652.                                                                     page 24
  1653. ---------------------------------------------------------------------------
  1654.  
  1655.  
  1656.  
  1657.  
  1658.     LIMITS - The following limits are built into all versions of Executive
  1659.              Host.
  1660.  
  1661.        9,999 Registered Callers.
  1662.          999 Conferences, each with its own message base.
  1663.           99 Filelists per conference (9,801 total).
  1664.           99 Bulletins per conference (9,801 total).
  1665.           99 Doors per conference (9,801 total).
  1666.      999,999 Messages in each conference message base (98,999,901 total).
  1667.  
  1668.     Of course disk space is a limiting factor in many cases.
  1669.  
  1670.  
  1671.     SUPPORT - Support for Executive Host is available exclusively at the
  1672.     Executive Software Products BBS listed below.  Support is available
  1673.     24 hours a day.
  1674.  
  1675.     Main Support Board - ESP BBS, (618) 993-5091 (14400bps,N,8,1).
  1676.     We will always be operating with the latest version of Executive Host
  1677.     Software (sometimes Beta), and a HST Dual-Standard V32.bis modem.
  1678.  
  1679.     The author (John Wright) is active in the Telix conference on the
  1680.     RIMES international mail network, if you wish to contact him there.
  1681.  
  1682.     Support is also available on Compuserve in the IBMBBS area (76605,1310).
  1683.     The author checks this conference weekly.  Please do not leave private
  1684.     E-mail, as this helps only yourself, and defeats the purpose of a
  1685.     public support arena.
  1686.  
  1687.     Priority of support will always go to Registered users of Executive Host.
  1688.  
  1689.     *** REGISTER EXECUTIVE HOST ON-LINE WITH YOUR VISA/MASTERCARD/DISCOVER CARD
  1690.     ON OUR 24 HOUR SUPPORT BULLETIN BOARD.  ORDERS ARE USUALLY PROCESSED AND
  1691.     AVAILABLE IMMEDIATELY FOR DOWNLOAD.  FOREIGN CREDIT CARDS ACCEPTED.
  1692.  
  1693.     Thank you and enjoy Executive Host.
  1694.  
  1695.  
  1696.  
  1697.  
  1698.  
  1699.  
  1700.  
  1701.  
  1702.  
  1703.  
  1704.  
  1705.  
  1706.  
  1707.  
  1708.  
  1709.  
  1710.  
  1711.  
  1712.  
  1713.  
  1714.  
  1715.  
  1716.  
  1717.  
  1718.                                                                     page A1
  1719. ---------------------------------------------------------------------------
  1720.  
  1721.  
  1722.  
  1723.  
  1724.     APPENDIX A - HIGH SPEED AND ERROR CORRECTING MODEM SETUP
  1725.  
  1726.  
  1727.     The US Robotics and other high speed or error correcting modems require
  1728.     special settings in order to work properly with Telix and Executive Host.
  1729.     You have two choices that will allow you to connect with all callers.
  1730.     But first, make sure that you have a copy of Executive Host 1.3 or above.
  1731.     Support for these modems was not included with earlier versions.
  1732.  
  1733.     OPTION 1:  Set the Executive Host configuration "Lock Baud Rates" to
  1734.                "YES".
  1735.  
  1736.     Then go into Telix configuration and ensure that the two screens
  1737.     below are set as indicated.  The most important settings for
  1738.     Executive Host have been marked with the "(*)" sign.  These
  1739.     settings MUST be set as shown to have the Host perform correctly.
  1740.     The Baud rate shown below should be set at 4800 or 9600 for 2400cps
  1741.     modems, or 19200 or 38400 for high speed (9600 baud) modems, such as
  1742.     the USRobotics HST dual standard.
  1743.    
  1744.     ╒═╡ Terminal options ╞═════════════════════════════════════════════════╕
  1745.     │                                                                      │
  1746.     │ A - Baud 19200   Parity None    Data length 8    Stop bits 1    (*)  │
  1747.     │ B - COM2 or COM1                                                     │
  1748.     │                                                                      │
  1749.     │ C - Default terminal type ........... ANSI-BBS                  (*)  │
  1750.     │ D - Status line ..................... Bottom                    (*)  │
  1751.     │ E - Local echo ...................... Off                            │
  1752.     │ F - Add Line Feeds after CRs ........ Off                            │
  1753.     │ G - Strip high bit (incoming data) .. Off                            │
  1754.     │ H - Received Backspace destructive .. On                             │
  1755.     │ I - XON/XOFF software flow control .. On                        (*)  │
  1756.     │ J - CTS/RTS hardware flow control ... On                        (*)  │
  1757.     │ K - DSR/DTR hardware flow control ... Off                       (*)  │
  1758.     │ L - Compuserve Quick B transfers .... On                             │
  1759.     │ M - Zmodem auto-downloads ........... On                             │
  1760.     │ N - Answerback string (ENQ) .........                                │
  1761.     │                                                                      │
  1762.     │                                                                      │
  1763.     │ Change which setting?       (Return or Esc to exit)                  │
  1764.     ╘══════════════════════════════════════════════════════════════════════╛
  1765.  
  1766.  
  1767.  
  1768.  
  1769.  
  1770.  
  1771.  
  1772.  
  1773.  
  1774.  
  1775.  
  1776.  
  1777.  
  1778.  
  1779.  
  1780.  
  1781.  
  1782.  
  1783.  
  1784.                                                                     page A2
  1785. ---------------------------------------------------------------------------
  1786.  
  1787.  
  1788.  
  1789.  
  1790.     ╒═╡ Modem and dialing parameter setup ╞════════════════════════════════╕
  1791.     │                                                                      │
  1792.     │ A - Init string ......... ~~~+++~~~AT&B1&H1&I0&R2V1X4^M         (*)  │
  1793.     │ B - Dialing prefix 1 .... ATDP    (NOTE:  Be sure to save the above  │
  1794.     │ C - Dialing prefix 2 .... ATDP     string into your NVRAM "AT&W").   │
  1795.     │ D - Dialing prefix 3 .... ATDP                                       │
  1796.     │ E - Dialing suffix ...... ^M                                         │
  1797.     │ F - Connect string ...... CONNECT                                    │
  1798.     │ G - No connect strings .. NO CARRIER             BUSY                │
  1799.     │                           VOICE                  NO DIAL TONE        │
  1800.     │ H - Hang-up string ...... ~~~+++~~~ATH0^M                            │
  1801.     │ I - Auto answer string .. ~~~+++~~~ATS0=1^M                          │
  1802.     │ J - Dial cancel string .. ^M                                         │
  1803.     │                                                                      │
  1804.     │ K - Dial time ........... 50                                         │
  1805.     │ L - Redial pause ........ 10                                         │
  1806.     │ M - Auto baud detect .... Off                                   (*)  │
  1807.     │ N - Drop DTR to hangup .. On                                    (*)  │
  1808.     │                                                                      │
  1809.     │                                                                      │
  1810.     │ Change which setting?       (Return or Esc to exit)                  │
  1811.     ╘══════════════════════════════════════════════════════════════════════╛
  1812.  
  1813.     The new Telix modem configuration program (included with v3.15 of Telix),
  1814.     will setup your modem and Telix in a similar manner.  However, you must
  1815.     ensure that both CTS/RTS and Xon/Xoff flow control are enabled.  The
  1816.     Executive Host configuration option "Lock Baud Rates?" must be set to
  1817.     "Yes".
  1818.  
  1819.     Additional help for the setup of high speed and error correcting modems
  1820.     under Executive Host is available on our support BBS, 24 hours a day.
  1821.  
  1822.  
  1823.  
  1824.  
  1825.  
  1826.  
  1827.  
  1828.  
  1829.  
  1830.  
  1831.  
  1832.  
  1833.  
  1834.  
  1835.  
  1836.  
  1837.  
  1838.  
  1839.  
  1840.  
  1841.  
  1842.  
  1843.  
  1844.  
  1845.  
  1846.  
  1847.  
  1848.  
  1849.  
  1850.                                                                     page B1
  1851. ---------------------------------------------------------------------------
  1852.  
  1853.  
  1854.  
  1855.  
  1856.     APPENDIX B - MAIL DOORS, OFFLINE READERS, MAIL NETWORKS, AND FRONTENDS
  1857.  
  1858.     UNIVERSAL TEXT INTERFACE (UTI) - Executive Host UTI conversion
  1859.     utilities already exist to link the Executive Host message base with
  1860.     many external mail programs and networks.  The latest version of these
  1861.     drivers will always be made available on the bbs systems listed below.
  1862.     Steve Wood wrote the UTI utilities for Executive Host and his bbs is
  1863.     also listed (Woodshed BBS):  Thanks Steve!
  1864.  
  1865.              ESP BBS  -  (618) 993-5091  -  sysop, John Wright
  1866.     THE WOODSHED BBS  -  (602) 841-7881     sysop, Steve Wood
  1867.     EXIS (TELIX) BBS  -  (416) 439-8293     sysop, Jeff Woods
  1868.  
  1869.     The UTI utilities allow the sysop to use the following programs in
  1870.     conjunction with Executive Host.
  1871.  
  1872.     1. PCrelay Software - written by Kip Compton.
  1873.        This software allows Executive Host systems to be linked with
  1874.        the Relaynet (RIMES) international mail network, and other mail
  1875.        networks that run under PCrelay software.  PCrelay can also be
  1876.        used to link BBS's together (outside of a network), in order to
  1877.        share message bases.
  1878.  
  1879.     2. MegaDoor Offline Mail Door - written by Kip Compton.
  1880.        This software is setup as a door under Executive Host, and allows
  1881.        callers to download mail, read and reply offline, and upload
  1882.        new mail into the Executive Host system later.
  1883.  
  1884.     3. MegaReader Offline Mail Reader - written by Kip Compton.
  1885.        The MegaReader program is used by callers to read and reply offline
  1886.        to messages downloaded from the MegaDoor.
  1887.  
  1888.     4. Any other MegaMail compatible program or door available now or
  1889.        in the future.
  1890.  
  1891.     The latest version and technical support for all of the products
  1892.     listed above can be obtained directly from Kip Compton on his
  1893.     support bbs, 24 hours a day:  -  (703) 690-7361.
  1894.  
  1895.     FRONTEND PROGRAMS:
  1896.  
  1897.     Additionally, Executive Host now has sufficient support to be run
  1898.     from a frontend mail program.  Frontend Mail programs actually
  1899.     answer incoming calls, and then pass the necessary information on
  1900.     to the bbs software so that the caller can be logged in normally.
  1901.     Many people prefer to run BBS software from a frontend program
  1902.     such as FrontDoor, because of its consistent interface and also
  1903.     because of the many additional features available to the sysop
  1904.     while waiting for incoming calls.  Primarily however, frontend
  1905.     programs were designed for linking message base systems with
  1906.     other bbs systems and mail networks.  It is possible that the
  1907.     existing UTI drivers for Executive Host can be modified to allow
  1908.     the message base to be linked to networks via a frontend program.
  1909.  
  1910.  
  1911.  
  1912.  
  1913.  
  1914.  
  1915.  
  1916.                                                                     page B2
  1917. ---------------------------------------------------------------------------
  1918.  
  1919.  
  1920.  
  1921.  
  1922.     The same is true for linking the Executive Host message base with
  1923.     mail networks that require a frontend, such as the FidoNet
  1924.     international mail network.  However, at the time this manual was
  1925.     written, it has never been done, so further information is not
  1926.     currently available.
  1927.  
  1928.     In order to obtain the current caller information from the frontend
  1929.     program, Executive Host will read a file named FRONTEND.USR.  This
  1930.     file must contain three pieces of information, normally passed
  1931.     as command line parameters from frontend programs:
  1932.  
  1933.     baud rate
  1934.     port
  1935.     minutes left before next event
  1936.  
  1937.     This file can be built automatically by the batch file that
  1938.     calls Executive Host.  The FrontDoor mail program passes the baud,
  1939.     port, and minutes until next event information as %1, %2, and %3 command
  1940.     line variables.  An example of the EXEBBS.BAT file used by FrontDoor
  1941.     is listed below:
  1942.  
  1943.     ECHO %1 > FRONTEND.USR          ; copies the baud info to the new file
  1944.     ECHO %2 >> FRONTEND.USR         ; appends the port info to the file
  1945.     ECHO %3 >> FRONTEND.USR         ; appends the minutes left info
  1946.     BOARD.BAT                       ; runs Executive Host
  1947.  
  1948.     Please call the Executive Host support BBS (ESP BBS) for further
  1949.     information on setting up frontend programs.
  1950.